ST Suspension Fitment Notes

 

 

 

 

2. Not for station wagon models (Estate/ Avant/ Turnier/ Variant/ T-model).

4. Excluding four wheel drive models.

6. Not for vehicles with electronic damper control.

10.  Not for cars with Audi magnetic ride.

11. Excluding models with automatic level control, or automatic level system can be adjusted in accordance.

11a. Complete suspension kits are excluding models with automatic level control, please use ST springset.

27. The front indicator lights on these vehicles must be relocated or replaced. These can be acquired from the manufacturer under order number 46 226 698.

41. Front axle height adjustable, rear axle adjustable sports dampers. Height adjustment is by Torsion bar.

42. In combination with original wheels and tyres, wheelspacers might be necessary.

65. Excluding models with pneumatic suspension.

71. Only for cars with a clamp diameter of 55 mm on the front axle.

73. Rear shock absorbers with eye-mounting.

77. Rear shock absorbers with fork-mounting.

91. We recommend a special anti roll bar kit (part no. 680 50 008) for models with a drive shaft diameter of min. 50mm. This is for improving the clearance of the right hand side drive shaft. Because of car specific differences a clearance is not always given.

96. Not for cars from 2004 onwards with standard 16 Zoll wheels.

112. Because of the construction of the car the damping adjustment can only made when the damper is not mounted. By modifying the interior trim this problem can be avoided.

121. Please replace the anti-sway bar kit on max. tested lowering. This is for enough clearance of the right drive shaft. Anti-sway bar kit for cars without Xenon headlights: part no. 685 50 000 / Anti-sway bar kit for cars with Xenon headlights: part no. 685 50 005.

124. Please use different top mounts for models with a year of construction earlier than 6/92 (BMW part no.: 31 336 764 947).

164. Rear axle shock absorbers are not adjustable for dumping. Sport shock absorbers with a harder dumping characteristic will be supplied.

170. Only for 4 wheel drive models (4x4, 4motion, Quattro etc.).

184. Additional front axle assembly parts for vehicles with EDC are required from the automobile manufacturer: for the front: (BMW Part No.: dome bearings 31 331 091 709 + washer 31 331 116 983 + collar 31 331 110 196), for the rear: (BMW Teile-Nr. dome bearing 33 521 091 710 + 33 521 090 282 + washer 33 521 092 986 + dust cover 31 331 137 932 + bump stop 33 531 091 031.

185. For the rear axle sport shock absorbers will be supplied, the factory air spring will maintain. The lowering of the vehicle needs to be done according to the instructions.

186. At maximum lowering, FA indicator light and day headlight beyond STVZO have to be modified.

187. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141. BUY NOW!

188. At vehicles equipped with Audi magnetic ride, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510124. BUY NOW!

189. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510144. BUY NOW!

192. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510145. BUY NOW!

193. Vehicles with a two-part leaf spring on the rear axle have to be equipped with a one-piece leaf spring. (VW part no. for leaf spring 2K0 511 151 N.)

195. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510175. BUY NOW!

196. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510213 BUY NOW!

202. For rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. KW Part-no. 68510021. BUY NOW!

209. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342. BUY NOW!

210. For rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. KW Part-no. 68510065. BUY NOW!

211. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510370. BUY NOW!

216. If the car is equipped with PASM, the PASM needs to be disabled.

217. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510148. BUY NOW!

220. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510426. BUY NOW!

221. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510440. BUY NOW!

222. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510358. BUY NOW!

223. Sway bar link must be changed at cars with a sway bar link longer than 290 mm. Kia part number 54830A 6000.

224. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510462. BUY NOW!

225. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510228. BUY NOW!

226. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510486. BUY NOW!

X